List of Publications

1.

LEUNG AYT, Xu, Xinsheng, Zhou, Zhenhuan and WU Y (2009), Analytic stress intensity factors for finite elastic disk using symplectic expansion,  Engineering Fracture Mechanics,  August, 76(12): 1866-1882.

2.

CHENG CKC (2009), A fire safety of Hong Kong refuge floor building wall layout design,  Fire Safety Journal,  44: 545-558.

3.

CHENG CKC, Lam, K.M. and LEUNG AYT (2009), Wind flow in the recessed cavity of a tall building,  The Seventh Asia-Pacific Conference on Wind Engineering,  Taipei, Taiwan, 8-12 November, 2009 [To Present]

4.

LI DHW, Mak, Ada HL, Chan, WH and CHENG CKC (2009), Predicting energy saving and life cycle cost analysis for lighting and daylighting schemes,  International Journal of Green Energy,  6(4): 359-370.

5.

LEUNG M, Chan Y.S. and Yu J.Y. (2009), Integrated Model for the Stressors and Stresses of Construction Project Managers,  Construction Engineering and Management, ASCE,  135(2): 126-134.

6.

LEUNG M and Olomolaiye P. (2009), Risk and Construction Stakeholders  Chapter: 6, Blackwell Publishing,

7.

CHEUNG SO, CHOW PT and YIU TW (2009), Contingent Use of Negotiators’ Tactics in Construction Dispute Negotiation,  Journal of Construction Engineering and Management, ASCE,  135(6): 466-476.

8.

YIU TW and LAI WY (2009), Efficacy of Trust-building Tactics in Construction Mediation,  Journal of Construction Engineering and Management, ASCE,  135(8): 683-689.

9.

HE XQ, Kuang YD, Chen CY and Li GQ (2009), Enhanced mechanical properties of single-walled carbon nanotubes due to chemical functionalization,  J. Phys.: Condens. Matter,  21: 215301

10.

HE XQ and Huang XH (2009), On the use of cellular automata algorithm for the atomic-based simulation of carbon nanotubes,  PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES,  465(2101): 193-206.

11.

Chan Y.S., Yu J.Y. (2009), Integrated Model for the Stressors and Stresses of Construction Project Managers,  Construction Engineering and Management, ASCE,  135(2): 126-134.

12.

Chan Y.S., Yu J.Y. (2009), Integrated Model for the Stressors and Stresses of Construction Project Managers,  Construction Engineering and Management, ASCE,  135(2): 126-134.

13.

Chan Y.S.I and LEUNG M (2009), Optimizing Stress and Performance of Hong Kong Construction Professionals  VDM Verlag, Germany,

14.

GUTIERREZ, M and WANG JJF (2009), Non-coaxial version of Rowe’s stress-dilatancy relation,  Granular Matter,  11(2): 129-137.

15.

GUTIERREZ, M, WANG JJF and YOSHIMINE, M (2009), A Model for the Simple Shear Deformation of Sand Accounting for Principal Stress Rotation,  Acta Geotechnica,  4: 139-201.

16.

WANG JJF and GUTIERREZ, M (2009), Molecular Dynamics Simulations of Cyclic Loading Behavior of Carbon Nanotubes,  Journal of Nanomaterials,  2009: 1-9. [Article ID 625047, doi:10.1155/2009/625047]

17.

WANG JJF and GUTIERREZ, M (2009), Discrete Element Simulations of Direct Shear Specimen Scale Effects,  Géotechnique,  [Accepted for Publication]

18.

Kuang YD and HE XQ (2009), Young’s moduli of functionalized single-wall carbon nanotubes under tensile loading,  Composite Science and Technology,  69(2): 169-175.

19.

Kuang YD, HE XQ, Chen CY and Li GQ (2009), Buckling of functionalized single-walled nanotubes under axial compression,  Carbon,  47(1): 279-285.

20.

Leung M.Y. and Olomolaiye P. (2009), Construction Stakeholder Management  Chapter: Risk and Construction Stakeholders, Blackwell Publishing, p. 1-1

21.

Leung M.Y.; Olomolaiye P. (2009), Risk and Construction Stakeholders  Chapter: Construction Stakeholder Management, Blackwell Publishing, p. x-x

22.

Wu, Zhimin, Yang, Shutong, WU Y and Hu, Xiaozhi (2009), Analytical Method for Failure of Anchor-Grout-Concrete Anchorage due to Concrete Cone Failure and Interfacial Debonding,  Journal of Structural Engineering ASCE ,  April, 135(4): 356-365.

23.

Xu, Rongqiao and WU Y (2009), Analytical study of beams strengthened by adhesively bonded reinforcement with variable properties using state space method,  Composites Science and Technology,  Sept, 69(11-12): 1912-1918.

24.

Yan Y, HE XQ, Zhang LX and Wang CM (2009), Dynamic behavior of triple-walled carbon nanotubes conveying fluid,  Journal of Sound and Vibration,  319(3-5): 1003-1018.

25.

Yang, K, He, J, Tang, WJ, Qin, J and CHENG CKC (2009), On downward shortwave and longwave radiations over high altitude regions: Observation and modelling in the Tibetan Plateau,  Agricultural and Forest Meteorology,  [In Press]

26.

WU Y (2009), The structural behavior and design methodology for a new building system consisting of glass fiber reinforced gypsum panels,  Construction and Building Materials,  August, 23(8): 2905-2913.

27.

WU Y and WANG L (2009), Unified Strength Model for Square and Circular Concrete Columns Confined by External Jacket,  Journal of Structural Engineering ASCE,  March, 135(3): 253-261.

28.

WU Y, Wang, Zhenyu, Liu, Kang and He, Wei (2009), Numerical Analyses of Hybrid-Bonded FRP Strengthened Concrete Beams,  Computer-Aided Civil and Infrastructure Engineering,  July, 24(5): 371-384.

29.

Albermani F, KITIPORNCHAI S and CHAN WKR (2008), Failure analysis of transmission towers,  Engineering Failure Analysis,  [Article in press]

30.

LEUNG AYT, H Zhang, CHENG CKC and LEE YYR (2008), Particle swarm optimization of TMD for non-stationary base excitation during earthquake,  Journal of Earthquake Engineering and Structural Dynamics,  37(9): 1223-1246.

31.

CHENG CKC, LEUNG AYT and TSE KT (2008), Floor height effect on wind-induced ventilation of refuge floor design,  the 4th International Conference on Advances in Wind and Structure,  Editor: Prof. CK Choi, JeJu, Korea, May 2008 p.1221-1227

32.

CHENG CKC, Dr. KM Lam and Dr. FN Demirbilek (2008), Short communications - Effects of building wall arrangements on wind-induced ventilation through the refuge floor of a tall building,  International Journal of Wind Engineering and Industrial Areodynamics,  96(5): 656-664.

33.

LIM C (2008), Symplectic Elastictiy  World Scientific, [http://www.worldscibooks.com/engineering/6656.html]

34.

LEUNG M, Chan Y.S., Chong A. and Shem J. (2008), Developing structural integrated Stressor–Stress models for client’s and contractor’s cost engineers,  Construction Engineering and Management, ASCE,  134(8): 635-643.

35.

LEUNG M, Chan Y.S. and Olomolaiye P. (2008), Impact of stress on the performance of construction project managers,  Construction Engineering and Management, ASCE,  134(8): 644-652.

36.

LEUNG M, Chen D.Y. and Yu J.Y. (2008), Demystifying moderate variables of the interrelationships among affective commitment, job performance, and job satisfaction of construction professionals,  Construction Engineering and Management, ASCE,  134(12): 963-971.

37.

LEUNG M, Lu X.H., Chen D.Y. and Lu M. (2008), Impact of teaching approaches in construction engineering education: a comparative study between Hong Kong and Mainland China,  Journal of Engineering Education, ASCE,  97(2): 135-145.

38.

LEUNG M, Wang Y. and Olomolaiye P. (2008), Models of causal relationships of critical teaching–surface learning process factors amongst construction engineering undergraduates,  Journal for Education in Built Environment,  3(1): 49-67.

39.

LEUNG M, Zhang H. and Skitmore M. (2008), Effects of organizational supports on the stress of construction estimation participants,  Construction Engineering and Management, ASCE,  134(2): 84-93.

40.

LO SM, Zhao C.M., Liu M. and Copping A. (2008), A simulation model for studying the implementation of performance-based fire safety design in buildings,  Automation in Construction,  17: 852-863.

41.

CHEUNG SO, YIU TW, LEUNG AYT and Chiu OK (2008), Catastrophic Transitions of Construction Contracting Behavior,  Journal of Construction Engineering and Management, ASCE,  134(12): 942-952.

42.

CHEUNG SO, WONG WK, YIU TW and KWOK TW (2008), Exploring the Influence of Contract Governance on Connstruction Dispute Negotiation,  Journal of Professional Issues in Engineering Education and Practice, ASCE,  134(4): 397-398.

43.

LO YT, A. Nadeem, TANG WCP and P.C. Yu (2008), The effect of high temperature curing on the strength and carbonation of pozzolanic structural lightweight concretes,  Construction and Building Materials,  [In Press]

44.

LO YT, Cui H. Z., TANG WCP and Leung H. C. (2008), Strength analysis of bamboo by microscopic investigation of bamboo fibre,  Construction and Building Materials,  July, 22(7): 1532-1535.

45.

LO YT, CUI H and TANG WCP (2008), Phase Constitution at Interfacial between Lightweight Aggregate/Concrete Cement Paste Composite,  Materials Research Innovations,  September, 12(3): 123-126.

46.

LO YT, Cui, H. Z., TANG WCP and Leung W.M. (2008), The Effect of Aggregate Absorption on Pore Area at Interfacial Zone of Lightweight Concrete,  Construction and Building Materials,  April, 22(4): 623-628.

47.

LO YT, Sham, F.C, CUI H and TANG WCP (2008), Study of Short-term Shrinkage and Creep of Lightweight Concrete,  Materials Research Innovations,  September, 12(3): 151-154.

48.

LO YT, TANG WCP and A. Nadeem (2008), Comparison of carbonation of lightweight concrete with normal weight concrete at similar strength levels,  Construction and Building Materials,  August, 22(8): 1648-1655.

49.

YIU TW, CHEUNG SO and Chow PT (2008), Logistic Regression Modeling of Construction Negotiation Outcomes,  IEEE Transactions on Engineering Management,  55(3): 468-478.

50.

HE XQ, Qu C and Qin QH (2008), A Theoretical Model for Surface Bone Remodeling under Electromagnetic Loads,  Archive of Applied Mechanics,  78(3): 163-175.

51.

HE XQ, Wang CM, Yan Y, Zhang LX and Nie GH (2008), Pressure dependence of instability of multi-walled carbon nanotubes conveying fluid,  ARCHIVE OF APPLIED MECHANICS,  78(8): 637-648.

52.

CHAN WKR, Albermani F and Williams MS (2008), Evaluation of yielding shear panel for passive energy dissipation,  J. of Constructional Steel Research,  [In Press]

53.

CHAN WKR and F.Albermani (2008), Experimental study of steel slit damper for passive energy dissiaption,  Engineering Structures,  30(4): 1058-1066.

54.

Dr. W. Yao and Prof. W. Zhong (2008), Symplectic Elastictiy  World Scientific, [http://www.worldscibooks.com/engineering/6656.html]

55.

Dr. W. Yao and Prof. W. Zhong (2008), Symplectic Elastictiy  World Scientific, [http://www.worldscibooks.com/engineering/6656.html]

56.

Dr. Y. Wao, Prof. W. Zhong and LIM C (2008), Symplectic Elastictiy  World Scientific, [http://www.worldscibooks.com/engineering/6656.html]

57.

Fang Z, Yuan JP, Wang YC and LO SM (2008), Survey of pedestrian movement and development of a crowd dynamics model,  Fire Safety Journal,  43: 459-465.

58.

He, W., WU Y and LIEW KM (2008), A fracture energy based constitutive model for the analysis of reinforced concrete structures under cyclic loading,  Computer Methods in Applied Mechanics and Engineering ,  Oct, 197(51-52): 4745-4762.

59.

Huang HC, LO SM, Zhi GS and YUEN KKR (2008), Graph Theory Based Approach for Automatic Recognition of CAD Data,  Engineering Application of Artificial Intelligence,  21: 1073-1079.

60.

Huang, XL, Jia, XL, YANG J and WU Y (2008), Nonlinear Vibration and Dynamic Response of Three-Dimensional Braided Composite Plates,  Mechanics of Advanced Materials and Structures,  15: 53-63.

61.

Lin P, LO SM, Huang HC and YUEN KKR (2008), On the Use of Multi-stage Time-varying Quickest Time Approach for Optimization of Evacuation Planning,  Fire Safety Journal,  43: 282-290.

62.

Liu, Kang, WU Y and Jiang, Xinliang (2008), Shear strength of concrete filled glass fiber reinforced gypsum walls,  Materials and Structures,  May, 41(4): 649-662.

63.

TANG WCP and LO YT (2008), Mechanical and fracture properties of normal and high strength concretes with fly ash after exposure to high temperatures,  Magazine of Concrete Research,  [In Press]

64.

TANG WCP, LO YT and CHAN WKR (2008), Fracture Properties of Normal and Lightweight High-Strength Concrete,  Magazine of Concrete Research,  May, 60(4): 237-244.

65.

TANG WCP, LO YT and Nadeem A. (2008), Mechanical and Drying Shrinkage Properties of Polystyrene Aggregate Concrete,  Cement & Concrete Composites,  May, 30(5): 403-409.

66.

TANG WCP, LO YT and R.V. Balendran (2008), Bond performance of polystyrene aggregate concrete (PAC) reinforced with glass-fibre-reinforced polymer (GFRP) bars,  Building and Environment,  January , 43(1): 98-107.

67.

TANG WCP, Ng K.M., LO YT and TAM CM (2008), Fracture Properties of Concrete with Waste CD Fiber,  Materials Research Innovations,  December, 12(4)

68.

TSE KT, CHENG CKC and LEE YSR (2008), Time domain vibration control using aerodynamic wind tunnel model study measurements,  the 11th East Asia Pacific Conference on Structural Engineering & Construction,  Taipei, Taiwan,

69.

Wang, Leiming and WU Y (2008), Effect of Corner Radius on the Performance of CFRP-Confined Square Concrete Columns: Test,  Engineering Structures,  30(2): 493-505.

70.

Wong WK, CHEUNG SO, YIU TW and Pang HY (2008), A Framework for Trust in Construction Contracting,  International Journal of Project Management,  26: 821-829.

71.

Xu, Rongqiao and WU Y (2008), Free vibration and buckling of composite beams with interlayer slip by two-dimensional theory,  Journal of Sound and Vibration,  313(3-5): 875-890.

72.

Yanchun Yun, WU Y and TANG WCP (2008), Performance of FRP bonding systems under fatigue loading,  Engineering Structures,  November, 30(11): 3129-3140.

73.

WU Y (2008), Ductility Demand of Compression Yielding Fiber-Reinforced Polymer-Reinforced Concrete Beams,  ACI structural Journal,  105(1): 104-110.

74.

WU Y and Huang, Yue (2008), Hybrid bonding of FRP to reinforced concrete structures,  Journal of Composites for Construction, ASCE ,  May/June, 12(3): 266-273.

75.

WU Y, Liu, Tao and Wang, Leiming (2008), Experimental Investigation on Seismic Retrofitting of Square RC Columns by Carbon FRP Sheet Confinement Combined with Transverse Short Glass FRP Bars in Bored Holes,  Journal of Composite for Construction, ASCE ,  12(1): 53-60.